4066一全球赢家信心之首选|澳门有限公司-官方网站

Pressure Vessels

Pressure Vessels

more> Ice System Pressure Vessel

No.Snowkey

shell-and-tube condensers can be divided into water cooling condensers and refrigerant cooling condensers, are used to cool the refrigerant and adopt quality and efficient heat exchange tubes;

Shell-and-tube condenser

NO.Snowkey

No.Snowkey

In the refrigeration system, it is used to adjust and stabilize the ammonia liquid circulation and store ammonia liquid.Design pressure: 2.1 MPa, pneumatic test pressure: 2.42 MPa, design temperature: 50 ℃

Liquid reservoir

NO.Snowkey

No.Snowkey

To separate gas and liquid in refrigerant

Eliminator

NO.Snowkey

No.Snowkey

To reduce flow rate of ammonia gas compressed by the compressor and of lubricant carried and change flow direction so as to separate lubricant

Oil separator

NO.Snowkey

Three-in-one device (heat exchanger+ gas-liquid separator + reservoir)

No.Snowkey

A vertical jacketed vessel earns its name of three-in-one vessel by combining a heat exchanger, a gas-liquid separator and a reservoir. It is arranged at the border of high pressure side and low pressure side, with the inner barrel at the low pressure side and the outer barrel at the high pressure side

Three-in-one device (heat exchanger+ gas-liquid separator + reservoir)

NO.Snowkey

No.Snowkey

To cool high-temperature lubricant compressed by the compressor, and return lubricant after reaching certain temperature to the compressor. As shell-and-tube heat exchange, the oil cooler is equipped with high-efficiency heat exchange tube

Oil cooler

NO.Snowkey

more> Industrial Refrigeration Pressure Vessel

No.Snowkey

Design pressure: 2.1 MPa, pneumatic test pressure: 2.42 MPa, design temperature: 50 ℃

Siphon Tank

NO.Snowkey

No.Snowkey

Design pressure 1.6 MPa, pneumatic test pressure of 1.84 MPa, design temperature 43 ℃

Ammonia Liquid Separator

NO.Snowkey

No.Snowkey

Design pressure: 2.1 MPa, pneumatic test pressure of 2.42 MPa, design temperature 50 ℃

Low-pressure Oil Catcher

NO.Snowkey

4066一全球赢家信心之首选|澳门有限公司-官方网站

Pressure Vessels

Pressure Vessels

No.Snowkey

shell-and-tube condensers can be divided into water cooling condensers and refrigerant cooling condensers, are used to cool the refrigerant and adopt quality and efficient heat exchange tubes;

Shell-and-tube condenser

NO.Snowkey

No.Snowkey

In the refrigeration system, it is used to adjust and stabilize the ammonia liquid circulation and store ammonia liquid.Design pressure: 2.1 MPa, pneumatic test pressure: 2.42 MPa, design temperature: 50 ℃

Liquid reservoir

NO.Snowkey

No.Snowkey

To separate gas and liquid in refrigerant

Eliminator

NO.Snowkey

No.Snowkey

To reduce flow rate of ammonia gas compressed by the compressor and of lubricant carried and change flow direction so as to separate lubricant

Oil separator

NO.Snowkey

No.Snowkey

Three-in-one device (heat exchanger+ gas-liquid separator + reservoir)

NO.Snowkey

No.Snowkey

To cool high-temperature lubricant compressed by the compressor, and return lubricant after reaching certain temperature to the compressor. As shell-and-tube heat exchange, the oil cooler is equipped with high-efficiency heat exchange tube

Oil cooler

NO.Snowkey

No.Snowkey

Design pressure: 2.1 MPa, pneumatic test pressure: 2.42 MPa, design temperature: 50 ℃

Siphon Tank

NO.Snowkey

No.Snowkey

Design pressure 1.6 MPa, pneumatic test pressure of 1.84 MPa, design temperature 43 ℃

Ammonia Liquid Separator

NO.Snowkey

No.Snowkey

Design pressure: 2.1 MPa, pneumatic test pressure of 2.42 MPa, design temperature 50 ℃

Low-pressure Oil Catcher

NO.Snowkey

No.Snowkey

Design pressure 1.6 MPa, pneumatic test pressure of 1.84 MPa, design temperature 43 ℃

Low-pressure Circulating Barrel

NO.Snowkey